Route Tree • Free Printable PDF

Flag Football Route Tree: Every Route, Number and Diagram

A route tree is the set of basic pass routes a receiver can run from one spot, numbered so a coach can call them fast. The classic tree has 9 routes: 1 flat, 2 slant, 3 comeback, 4 curl, 5 out, 6 in (dig), 7 corner, 8 post and 9 go. Odd numbers break toward the sideline and even numbers toward the middle. Below is each route at flag football depths, plus the drag, and a free route tree PDF for your players.

+15+10+5WR123456789
#RouteBreaks
1FlatTo the sideline
2SlantTo the middle
3ComebackTo the sideline
4Curl (Hook)To the middle
5OutTo the sideline
6In (Dig)To the middle
7Corner (Flag)To the sideline
8PostTo the middle
9Go (Fly, Streak)Straight up
–Drag (Shallow cross)To the middle

Free, no watermark, no sign-up. One US Letter page.

Stamp These Routes in the Play Designer

How to Run Each Route

Every diagram uses the same scale, starting from a receiver on the left side, at the flag football depths the play designer uses. The dashed line is the line of scrimmage, and each white line is 5 yards.

1

Flat

+15+10+5WR
How to run it
1 yard up, then flatten out toward the sideline for about 6 yards.
Why it works
A quick, safe outlet. Defenders who drop deep leave the flat open, and the ball gets there before the rusher does.
Flag tip
Great for the RB or a slot receiver. Turn your head to the QB as soon as you flatten out.

Draw it with the Route tool in the play designer.

2

Slant

+15+10+5WR
How to run it
2 yards up, then cut 45 degrees toward the middle.
Why it works
One of the fastest throws in football. It beats man coverage and defenders playing off the receiver.
Flag tip
Catch it on the run and keep going upfield. A great answer to a quick rush.

One-click stamp in the play designer.

3

Comeback

+15+10+5WR
How to run it
9 yards up as if going deep, then come back toward the sideline about 2 yards.
Why it works
It sells the go route, then stops. A defender running with you cannot stop as fast as you can.
Flag tip
It needs a strong, on-time throw, so save it for older players.

Draw it with the Route tool in the play designer.

4

Curl

Also called: Hook

+15+10+5WR
How to run it
5 yards up, stop, and turn back to the QB, settling 1 yard inside.
Why it works
It sits in the hole between zone defenders, which makes it an easy read for young quarterbacks.
Flag tip
Face the QB with your hands ready and come back to the ball.

One-click stamp in the play designer.

5

Out

+15+10+5WR
How to run it
5 yards up, then cut straight to the sideline.
Why it works
It attacks a defender lined up inside you and gives you room to catch it near the sideline.
Flag tip
Make the cut sharp, at 90 degrees, and catch the ball before you reach the sideline.

One-click stamp in the play designer.

6

In

Also called: Dig

+15+10+5WR
How to run it
5 yards up, then cut straight across toward the middle.
Why it works
It crosses in front of the defenders: good against man coverage, and it finds the open window in a zone.
Flag tip
Keep running across after the cut so the QB can lead you.

One-click stamp in the play designer.

7

Corner

Also called: Flag

+15+10+5WR
How to run it
6 yards up, then break 45 degrees toward the back corner.
Why it works
It gets behind a defender who stays inside, and over the top of a defender sitting in the flat.
Flag tip
Pair it with a curl or hitch underneath: that is the Smash concept.

One-click stamp in the play designer.

8

Post

+15+10+5WR
How to run it
6 yards up, then break 45 degrees toward the deep middle.
Why it works
It attacks the middle of the field behind the defense, especially when only one defender is deep.
Flag tip
Look for the ball over your inside shoulder.

One-click stamp in the play designer.

9

Go

Also called: Fly, Streak

+15+10+5WR
How to run it
Sprint straight upfield and keep going until the ball arrives.
Why it works
It pushes the defense back and opens space underneath for every other route.
Flag tip
Run it hard even when the ball goes elsewhere: a real go route clears space for the short throws.

One-click stamp in the play designer.

–

Drag

Also called: Shallow cross

+15+10+5WR
How to run it
2 yards up, then run flat across the field for about 12 yards, just past the line.
Why it works
It runs underneath the defenders. Two drags crossing each other (the Mesh concept) make man coverage hard.
Flag tip
Stay shallow, 2 to 3 yards deep. In flag football the center makes a great drag runner.

One-click stamp in the play designer.

Route Tree Numbers

Numbers let a coach call several receivers’ routes in one short word: in a call like “72”, one receiver runs the 7 (corner) and another runs the 2 (slant), in an order the team agrees on. In the classic tree, routes that break to the sideline get odd numbers (1 flat, 3 comeback, 5 out, 7 corner) and routes that break to the middle get even numbers (2 slant, 4 curl, 6 in, 8 post). The 9 is the go, straight up the field.

There is no single official numbering. NFL FLAG and many leagues and teams use their own numbers or just route names, so check your league’s playbook and teach the system your players will hear on game day. The drag is not part of the classic 1–9 tree, which is why it has no number here.

Route Combinations

Plays put two or three routes together so one defender cannot cover them all. Open a play to see it run.

Slant-Flat

A slant outside with a flat underneath puts the defender in the flat in a bind: cover one and the QB throws the other.

Smash

A short curl or hitch with a corner over the top. If the flat defender jumps the short route, throw the corner.

Mesh

Two drags cross each other a few yards deep, so defenders in man coverage run into each other.

Flood

Three receivers at three depths on one side of the field. Zone defenders cannot cover all three levels.

Levels

An in route over a drag, both crossing the middle at two depths while another receiver clears deep.

Four Verticals

Four go routes stretch the deep defense, with the RB as the check-down underneath.

Keep Building Your Playbook

Frequently Asked Questions

What is a route tree in football?

A route tree is a diagram of the basic pass routes a receiver can run from the same starting spot. Drawn together, the routes branch out like a tree. Each route has a name and usually a number, so a coach can call a whole play with a few digits.

What do the route tree numbers mean?

In the classic tree, 1 is the flat, 2 the slant, 3 the comeback, 4 the curl, 5 the out, 6 the in or dig, 7 the corner, 8 the post and 9 the go. Routes that break to the sideline get odd numbers and routes that break to the middle get even numbers. Many teams and leagues, NFL FLAG included, use their own numbers or names, so teach the system your league uses.

How many routes should youth flag football players learn?

Start with three or four that are easy to run and throw: the go, slant, out and curl. Add the post, corner and drag once those are crisp. The comeback needs a strong throw, so it fits older players best.

How deep should flag football routes be?

Shorter than in tackle football. The diagrams here use a 2-yard slant stem and 5- to 6-yard breaks for the out, in, curl, post and corner, which suits 5v5 and 7v7 fields and young arms. Older and adult players can run every route deeper.

Can I print the route tree?

Yes. Download the free route tree PDF: one US Letter page with the numbered tree and how to run each route. No sign-up and no watermark.

Can I use these routes in my own plays?

Yes. In the free play designer, select a receiver and stamp the slant, out, in, curl, post, corner, go or drag in one click, or draw a flat or comeback with the Route tool.